Skip to main content

ASIC Design Engineer - Hardware at NVIDIA

 Hello Dear Readers,

Currently at Nvidia Bangalore vacancy for ASIC Design Engineer-Hardware role.

As a member of our ASIC backend/timing team, you'll be working on product designs, focusing on such tasks as clocks, timing convergence, chip layout planning, design optimization and automation of work flows. Specifically, you'll be focusing on full chip layout planning (partitioning, planning clock distribution and other structures, methodology), full chip  timing closure signoff (using tools such as Synopsys Primetime, Cadence Tempus etc.), design optimization, and gate-level design of high-speed logic. In this role you will also interface with architecture, rtl design, layout implementation, methodology and custom design teams to drive design implementation, timing analysis/closure all the way from micro-architecture to tape-out.

What you'll be doing:

  • Develop and enhance timing analysis/signoff work flow from frontend (pre-layout) to backend (post-layout) at both chip and block level.

  • Chip level Integration, physically partitioning and floor planning.

  • Develop custom timing scripts using tcl/primetime for clock skew analysis, special circuits such as clock dividers, core logic <-> IO macros interfaces such as PCI-E, Frame-Buffer/Memory, HDMI, etc.

  • Design optimization and timing convergence-related tasks.

  • Development of PD workflows.

What we need to see:

  • BS or MS in Electrical Engineering or Computer Science, or equivalent experience.

  • 3+ years of relevant ASIC design experience, ideally with a focus on timing.

NVIDIA is widely considered to be one of the technology world’s most desirable employers. We have some of the most brilliant and talented people on the planet working for us. If you're creative and autonomous, we want to hear from you!


Connect with me 

Comments

Post a Comment

Popular posts from this blog

Physical Design Engineer- ICE at Intel

  Hello Dear Readers, Currently at Intel Bangalore vacancy for Physical Design Engineer- ICE role. Job Description: Responsibilities may be quite diverse and are technical in nature. Creates bottoms-up elements of chip design including but not limited to cell, and block-level Semi-custom layouts, FUB-level floor plans, abstract view generation, RC extraction and schematic-to-layout verification, reliability verification and debug using phases of physical design development including parasitic extraction, custom polygon editing, auto-place and route algorithms, floor planning, full-chip assembly, packaging, and verification. Troubleshoots a wide variety up to and including difficult design issues and applied proactive intervention. Schedules, staffs, executes and verifies complex chips development and execution of project methodologies and/or flow developments. Requires expansive knowledge and practical application of methodologies and physical design. Qualifications: Education...
Post a Comment
Read more

JRF and PhD Position: at BITS Pilani Hyderabad

  Hello Dear Readers, Currently at BITS Pilani Hyderabad vacancy for JRF and PhD Position role. There is  one vacancy for the JRF Position on a DST-SERB-sponsored research project in the department of EEE at BITS Pilani Hyderabad. The fellowship amount is ₹31000 per month + HRA.   𝐄𝐥𝐢𝐠𝐢𝐛𝐢𝐥𝐢𝐭𝐲 𝐫𝐞𝐪𝐮𝐢𝐫𝐞𝐦𝐞𝐧𝐭𝐬:   M.E./M. Tech in ECE/ VLSI/ Microelectronics/ Digital Design/ Embedded System or equivalent or  M.Sc .  Electronics with at least 60% marks and GATE/NET qualification.  Knowledge of FPGA prototype, Verilog/ VHDL, Xilinx Vivado/ ISE tool, and Matlab are mandatory.  Experience in implementing the communication protocols such as I2C, SPI, WiFi, Zigbee, LoRa, etc can be the added advantage.     𝐍𝐎𝐓𝐄: 𝟏. 𝐆𝐀𝐓𝐄/𝐍𝐄𝐓 𝐜𝐚𝐧 𝐛𝐞 𝐞𝐱𝐞𝐦𝐩𝐭𝐞𝐝 𝐟𝐨𝐫 𝐭𝐡𝐞 𝐌.𝐄./𝐌.𝐓𝐞𝐜𝐡. 𝐬𝐭𝐮𝐝𝐞𝐧𝐭𝐬 𝐟𝐫𝐨𝐦 𝐭𝐡𝐞 𝐂𝐞𝐧𝐭𝐫𝐚𝐥 𝐟𝐮𝐧𝐝𝐞𝐝 𝐈𝐧𝐬𝐭𝐢𝐭𝐮𝐭𝐞𝐬/ 𝐔𝐧𝐢𝐯𝐞𝐫𝐬𝐢𝐭𝐢𝐞𝐬 𝐰𝐢𝐭𝐡 𝐠𝐨?...
Post a Comment
Read more